e9335aa thru E9336AA low profile surface mount single phase bridge rectifiers reverse voltage 600~800v output current 3a features ? low forward voltage drop ? low leakage current ? solder dip 260 c, 10 s ? ideal for automated placement ? glass passivated standard bridge rectifiers ? moisture sensitivity: level 1 , per j-std-020 ? low profile typical height 1.3mm typical applications for use of general purpose ac to dc bridge rectification in power supply charger office appliance home appliance and telecome device. vrrm v vrms v vdc v io(av) a ifsm a i 2 t a 2 sec tj, tstg c maximum instantaneous forward voltage if=1.5a, ta=25 v f volts ta=25 ta=125 c j pf r ja r jc notes: 1. measured at 1.0mhz and applied reverse voltage of 4.0 d.c. 2. on glass epoxy pcb, mounted recommended copper pad areas maximum ratings (ta = 25 c unless otherwise noted) parameter symbol unit maximum repetitive peak reverse voltage 800 e9335aa E9336AA 600 maximum rms voltage maximum dc blocking voltage maximum average output rectified current 3.0 560 800 420 600 peak forward surge current 8.3 ms single half sine-wave superimposed on rated load 80 rating for fusing(t<8.3ms) 26.7 operating junction and storage temperature range - 55 to + 150 250 electrical characteristics (ta = 25 c unless otherwise noted) parameter test conditions symbol unit e9335aa E9336AA 0.95 maximum dc reverse current at rated dc blocking voltage i r 5 a typical thermal resistance (2) 24 /w 7.2 typical junction capacitance (1) 22.7 thermal characteristics parameter symbol unit e9335aa E9336AA case: e93 www.goodark.com 1/4 2015.12-rev.a
e9335aa thru E9336AA low profile surface mount single phase bridge rectifiers reverse voltage 600~800v output current 3a ratings and characteristics curves (ta = 25 unless otherwise noted) figure 3. typical forward characteristics figure 4. typical reverse characteristics figure 2.maximum non - repetitive peak forward surge current figure 1.output rectifier current derating curve 0.01 0.1 1 10 100 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 instantaneous forward current (a) instantaneous forward voltage (v) 25 85 125 150 0.001 0.01 0.1 1 10 100 1000 10000 100000 0 20 40 60 80 100 120 instantaneous reverse current (ua) percent of rated peak reverse voltage (%) 25 85 125 150 1 10 100 0.10 1.00 10.00 junction capacitance (pf) reverse voltage (v) tj=25 f=1.0mhz vsig=50m vp - p figure 5. typical junction capacitance 0 0.5 1 1.5 2 2.5 3 0 25 50 75 100 125 150 bridge output full wave rectified current, a case temperature 0 10 20 30 40 50 60 70 80 1 10 100 peak forward surge current a number of cycles at 60hz www.goodark.com 2/4 2015.12-rev.a
e9335aa thru E9336AA low profile surface mount single phase bridge rectifiers reverse voltage 600~800v output current 3a package outline dimensions soldering footprint unit:mm unit:mm www.goodark.com 3/4 2015.12-rev.a dim min nom. max dim min nom. max a 1.15 1.30 1.45 f1 4.16 4.36 4.56 b 12.75 13.0 13.25 f2 4.16 4.36 4.56 b1 12.75 13.0 13.25 f3 3.20 3.40 3.60 c 0.20 0.25 0.40 h 4.12 4.42 4.72 d 3.20 3.40 3.60 h1 2 2.15 2.35 d1 10.72 10.9 11.12 k 0.85 1.0 1.15 e 12.15 12.30 12.45 k1 1.45 1.7 1.95 e1 12.15 12.30 12.45
e9335aa thru E9336AA low profile surface mount single phase bridge rectifiers reverse voltage 600~800v output current 3a disclaimers these materials are intended as a reference to assist our customers in the selection of the suzhou good- ark product best suited to the customer s application; they do not convey any license under any intellectual property rights, or any other rights, belonging to suzhou good-ark electronics co., ltd.or a third party. suzhou good-ark electronics co., ltd. assumes no responsibility for any damage, or infringement of any third-party s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. all information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by suzhou good-ark electronics co., ltd. without notice due to product improvements or other reasons. it is therefore recommended that customers contact suzhou good-ark electronics co., ltd. or an authorized suzhou good-ark electronics co., ltd. for the latest product information before purchasing a product listed herein. the information described here may contain technical inaccuracies or typographical errors. suzhou good-ark electronics co., ltd. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. please also pay attention to information published by suzhou good-ark electronics co., ltd. by various means, including our website home page. (http://www.goodark.com) when using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. suzhou good-ark electronics co., ltd. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. the prior written approval of suzhou good-ark electronics co., ltd. is necessary to reprint or reproduce in whole or in part these materials. please contact suzhou good-ark electronics co., ltd. or an authorized distributor for further details on these materials or the products contained herein. www.goodark.com 4/4 2015.12-rev.a
|
